SafanDarley

Superior integration of hydraulics and electronics

Energy saving hybrid drive, low Co2 emissions
Only 22 litre oil tank
Low noise
User friendly touch screen control
Return-to-Sender sheet support
Torsion free cutting of small strips
Scrap separation
Fully automatic adjustment of cutting angle and clearance

With the M-Shear, the blade cuts four ways

The robust hydraulic systems in the SafanDarley M-Shear are controlled by modern electronics. This means that the regulatory mechanism has evolved from hydraulic to electronic technology. A successful E-volution that increases both your productivity and the quality of your products.

The standard equipment for the SafanDarley M-Shear includes blades with four cutting edges, on both the top and bottom. Your shearing is done very economically because blade wear is spread over the blade’s entire length, thanks to the programmable starting position of the cutting beam.

The servo-electronic motor powering the hybrid drive only runs when the cutting beam is in motion. This yields two advantages: energy savings and the cutting cycle produces low noise levels. In combination with the solid construction and the modular assembly, makes this M-Shear a superior guillotine shear.

Request a demonstration

Thank you

Thank you for your request

Model	Cutting capacity	Cutting length in inches	Main motor power in kW	No. of strokes/min (stroke length max. cutting edge)	No. of strokes/min (stroke length min. cutting edge)	Cutting angle 0.5°-max (°)	Backgauge reach in mm	Backgauge speed in mm/sec	No. of hold-down pads	Weight in lb
125-4	-	-	-	-	-	-	-	-	-	-
205-6	0.236220472	81	11	32	90	2	39	472	14	9,259
310-6	0.236220472	122	11	24	80	2	39	472	20	13,669
610-6	-	-	-	-	-	-	-	-	-	-
430-8	0.31496063	169	15	13	30	1.5	39	472	26	31,967
310-10	0.393700787	122	15	12	30	2	39	472	20	21,605
610-10	-	-	-	-	-	-	-	-	-	-
310-16	0.62992126	122	30	12	34	3	49	295	20	27,558
430-16	0.62992126	169	30	8	26	3	49	295	26	47,399

Touch Screen control, type TS200 with TFT colour monitor on a swivel arm
CNC controlled backgauge
Automatic clearance and cutting-angle adjustment
Automatic retraction of the backgauge for narrow strip widths
Adjustable starting and end stopping position for the entire length of the cutting beam
Backgauge supports equipped with ball screws and play free linear guides
Maintenance free cutting beam guides
Fine adjustment of backgauge parallelism
Adjustable hold down cylinders
Push-on adiprene covers for the hold down cylinders
Blades with 4 cutting edges, suitable for shearing stainless steel (max. tensile strength 54,4 US ton per square inch)
Cutting line lighting with cutting line indication
2 support arms, adjustable over the entire width of the table (length is approx. 47,24 inches from the cutting line)
2 squaring guides on the right and left sides of the table (across the entire table width)
2 rulers in the table
T slots and hand slots spread across the width of the table
1 T slot on the front of the table
2 spring-action stops
Key switch (3 positions)
Safety features complying with the European Machine Directive
Finger guard
Filled oil reservoir
Foundation plates

Available accessories

« Back to the overview

Options:
- Adjustable corner

Bekijk opties

Options:
- Extended support arms and optional Stops for the support arms

Bekijk opties

Options:
- Light screen safety or
- Folding finger guard

Bekijk opties

Options:
- Ball casters in the table
- Scratch-free table cover

Bekijk opties

Options:
- Pneumatic installation for holding plates up
- Return To Sender function
- Fingers for holding plates up in back gauge beam

Bekijk opties

Options:
- Scrap sorter (with/without sorting valve)
- Scrap removal cart with our without folding bottom

Bekijk opties

Options:
- Extended back gauge reach
- Pneumatic folding back gauge

Bekijk opties

Options:
- with stacker
- without stacker

Bekijk opties

The pneumatic installation for holding plates up supports the plate to be cut at the back of the shears, making it easy to position it against the back gauge.

For easy transposition of materials and scratch arms.

Adjustable corner. Adjustable corner guide in grades, four 90° quadrants.

For easy transposition of materials and scratch arms.

Entering the cutting size.

Finger guard across the entire working length.

Support and guidance of the materials to be cut.

Entering the cutting size.

The Return-to-sender function enables you to get more out of your shears, and to cut in an ergonomically responsible way. Advantages:
- Guiding the plate back
- Less damage
- Reverse cutting

Scrap removal and sorting function for small products and scrap.

Extended support arms and optional Stops for the support arms.

« Back to the overview

Safetyfirst

The safety features of the SafanDarley M-Shear fully satisfy the European Machine Directive. The cutting beam drive is equipped with block hydraulics. All visible high-pressure lines are protected. The shear has extensive guards protecting the back and sides.