H-Brake Hybrid+ 230T Ultra
Hybrid press brake with highest efficiency
Superior combination of hydraulics and electronics
- Hybrid drive
- Energy saving, low CO2 emissions
- Low-noise
- Up to 30% higher productivity
- Minimal oil volume and oil heating
- Minimal maintenance
- Flexibility to increase daylight opening
Lower energy, Higher productivity
At the heart of the machine is the advanced dual hybrid drive system. The combination of an AC servo motor and a hydraulic pump results in a drive system with extremely low energy consumption, low noise operation and high approach and return speeds. Due to its highly dynamic Y-axis control, the approach and return speeds are 200 mm/sec, cycle times are achieved that are significantly shorter than with traditional hydraulic press brakes, resulting in higher productivity.
A major advantage of this system is its drastically reduced energy consumption:
- Reduce costs - This becomes increasingly important as energy costs rise.
- Reduce CO2 emissions - and the resulting environmental damage
Request a demonstration
Thank you
Thank you for your request
Available accessories
« Back to the overview
Control
Options:
- EC20
- Dual display
- EC30
- EC40
- EC20
- Dual display
- EC30
- EC40
Bekijk opties
Axis / Back gauge system
Options:
- Z1+Z2 axis CNC controlled
- CNC controlled Delta X axis (horizontal transposition from a single back gauge finger)
- 3D back gauge
- Z1+Z2 axis CNC controlled
- CNC controlled Delta X axis (horizontal transposition from a single back gauge finger)
- 3D back gauge
Bekijk opties
Support arms press brakes
Options:
- Fixed support arms
- Fixed arms can be moved along the machine
- Fixed arms can be moved along the machine, and the height can be adjusted with a hand wheel
- Fixed arms can be moved along the machine, and the height can be adjusted pneumatically
- Fixed support arms
- Fixed arms can be moved along the machine
- Fixed arms can be moved along the machine, and the height can be adjusted with a hand wheel
- Fixed arms can be moved along the machine, and the height can be adjusted pneumatically
Bekijk opties
Tool system
Options:
- New Standard NSCL-l HC pro hydraulic tool clamp system
- European Style clamping (only in combination with a Q size of 650 mm)
- New Standard NSCL-l HC pro hydraulic tool clamp system
- European Style clamping (only in combination with a Q size of 650 mm)
Bekijk opties
Measurement
Options:
- E-bend S
- E-bend L Blue
- E-bend S
- E-bend L Blue
Bekijk opties
Bending aid
Options:
- E-Mate maximum plate weight 30kg.
- E-Mate Plus maximum plate weight 150 kg.
- E-Mate 2000 maximum plate weight 500 kg.
- E-Mate maximum plate weight 30kg.
- E-Mate Plus maximum plate weight 150 kg.
- E-Mate 2000 maximum plate weight 500 kg.
Bekijk opties
Parking station
Options:
- Parking station on the left of the machine.
- Parking station on the right of the machine.
- Parking station on the left of the machine.
- Parking station on the right of the machine.
Bekijk opties
Materials cupboard
Options:
- Materials cupboard on the machine
- Materials cupboard on the machine
Bekijk opties
Axis 3D back gauge
Back gauge system that serves as a gauge for various plate material products. Choice of back gauge systems depending on the complexity of the product to be bent.
Axis Back gauge system CNC controlled Delta X axis (horizontal transposition from a single back gauge finger)
Back gauge system that serves as a gauge for various plate material products. Choice of back gauge systems depending on the complexity of the product to be bent.
Axis Back gauge system Z1+Z2 axis CNC controlled
Back gauge system that serves as a gauge for various plate material products. Choice of back gauge systems depending on the complexity of the product to be bent.
Control EC20
This 2D graphic control allows you to easily draw in 2D, after which the bending program is automatically generated and simulated. This EC20 also has the option of displaying programs created off-line, in Autopol and Radan, graphically.
Control EC30
The EC 30 control enables you to program in 3D.
Control double display
By working with a double display, a paperless working environment is created.
E-Bend L Blue
The system consists of two laser sensors on each side of the table, which are CNC controlled through the control system. The system continuously displays and corrects the position of the Y axis on the basis of the actual angle of the product, thus guaranteeing that the end product has the highest degree of corner precision.
E-Bend S
The system measures the plate thickness down to one hundredth. You can programme exactly when measurements must be taken.
E-Mate 2000: maximum plate weight 500 kg.
The bending aid supports and follows the plate very carefully throughout the entire bending process. The height and V size are variable and can easily be adjusted to the bending aid.
E-Mate plus: maximum plate weight 150 kg.
The bending aid supports and follows the plate very carefully throughout the entire bending process. The height and V size are variable and can easily be adjusted to the bending aid.
Fixed support arms
Support arms serve to support the plate material.
Fixed support arms can be moved
Fixed arms can be moved along the machine.
Fixed support arms moveable and adjustable in height
Fixed arms can be moved along the machine, and the height can be adjusted with a hand wheel.
Fixed support arms pneumatic
Fixed arms can be moved along the machine, and the height can be adjusted pneumatically. Support arms serve to support the plate material.
Materials cupboard
Materials cupboard on the machine. Storage facility for – for example – tools or documentation.
Parking station Left
Parking station on the left of the machine. Parking station for the benefit of bending aids and/or support arms. The bending aids and/or support arms can be placed on the left or right side on the outside of the machine.
Parking station right
Parking station on the right of the machine. Parking station for the benefit of bending aids and/or support arms. The bending aids and/or support arms can be placed on the left or right side on the outside of the machine.
Tool system European Style
European-style clamping (only in combination with a Q size of 650 mm). European-style tool intake.
Tool system New Standard
New Standard NSCL-l HC pro hydraulic tool clamp system. Quick exchange system for vertical loading and unloading through safety click in tools.
Completetouch screen convenience
The SafanDarley E-Control is fully touch screen. The superior ergonomic design means that only those buttons which are needed are visible on the 21" screen at the time of operation. The control simply works on a PC basis under Microsoft Windows®, the software having been developed for the Microsoft. net Framework.
The H-Brake Hybrid+ 230T Ultra comes as standard with a dual screen display for additional information, bringing paperless operation one step closer.
