E-Brake 50-130T Ultra

具备均匀弯曲功能的伺服电子折弯机

全电子驱动
生产率提高30%以上
节约能源可达50%，减少二氧化碳排放量
无有害液压油
低噪音运行
后档规遍布整个工作长度
方便用户使用的触摸屏控制

集结安全系统

高速工作但没任何危险：SafanDarley另安全集结在控制系统成真。通过 SafanDarley E-Controls管控安全光栅屏障达成。除此，SafanDarley E-折弯机附加内置安全配置。弹簧复位应用保证即使机床故障，上梁永远向上动作。

要求示範

Thank you

Thank you for your request

技术规格

規格
標準規格

Model	壓力噸位	長度	壓力(KN)	最大行程 (mm)	開口高度 (mm)	下降速度 (mm/sec)	折彎速度 (mm/sec)	回升速度(mm/sec)	馬達功率(KW)	機床重量 (KG)
50-2050	50	2040	500	300	590	160	50*	160	11	6100
80-2550	80	2550	800	300	590	90	50*	90	11	6900
100-3100	100	3060	1000	300	590	75	50*	75	11	7500
130-3100	130	3060	1300	300	590	110	50*	110	15	9300
130-4100	130	4080	1300	300	590	110	50*	110	15	11200

* 在CE版本中弯曲速度10毫米/秒

标准性能

SafanDarley EC20 数控触屏折弯控制系统，双屏设计，可移动和调整高度

R轴是数控驱动

Y1/Y2轴是数控驱动 (可倾斜 +/- 2.5 mm)

多选择数控驱动后定位 (X 轴)

手动 Z1 / Z2 调校

两个可调校和铰键定位块后定位

在线条上手动式移动调校后定位

Wila NSCL-II MC 高级上刀夹具配置机械式销夹和 OB/S-3 机械式销夹下模

NSCL-II Premium 高级数控台面绕道补偿

开口值 590 毫米 (Q 值)

两个支撑臂 (300 毫米)

“把持到运作” 功能脚踏

程控和集成安全光栅 (E-Control)

供电 3/N/PE 50 Hz 230/400 VAC

机床安全设计符合欧盟标准

配件

« 回到導引

Options:
- Z1+Z2 axis CNC controlled
- CNC controlled Delta X axis (horizontal transposition from a single back gauge finger)
- 3D back gauge

Bekijk opties

Options:
- 650 mm
- 690 mm

Bekijk opties

Options:
- Fixed support arms
- Fixed arms can be moved along the machine
- Fixed arms can be moved along the machine, and the height can be adjusted with a hand wheel
- Fixed arms can be moved along the machine, and the height can be adjusted pneumatically

Bekijk opties

Options:
- New Standard NSCL-l HC pro hydraulic tool clamp system
- European Style clamping (only in combination with a Q size of 650 mm)

Bekijk opties

Options:
- E-bend S
- E-bend L Blue

Bekijk opties

Options:
- Materials cupboard on the machine

Bekijk opties

Back gauge system that serves as a gauge for various plate material products Choice of back gauge systems depending on the complexity of the product to be bend.

The EC 30 control enables you to programme in 3D.

In addition to the functionality of the EC20 control, the EC40 Smart offers the option of drawing models on a mobile device (Designer), importing and unfolding 3D drawings, and performing a bending simulation. By “docking” the system with the machine control, data is synchronized, after which the program can be called up in the EC20 and production can start.

The system consists of two laser sensors on each side of the table, which are CNC controlled through the control system. The system continuously displays and corrects the position of the Y axis on the basis of the actual angle of the product, thus guaranteeing that the end product has the highest degree of corner precision.

The system measures the plate thickness down to one hundredth. You can programme exactly when measurements must be taken.