E-Brake 300T Ultra Dual Drive

具备均匀弯曲功能的伺服电子折弯机

全电子驱动
生产率提高30%以上
节约能源可达50%，减少二氧化碳排放量
无有害液压油
低噪音运行
后档规遍布整个工作长度
方便用户使用的触摸屏控制

集结安全系统

高速工作但没任何危险：SafanDarley另安全集结在控制系统成真。通过 SafanDarley E-Controls管控安全光栅屏障达成。

雙驅動系統

SafanDarley E-Brake 'Dual Drive' 300T 將 E-Brake 技術的獨特優勢帶入更高噸位的市場，折彎噸數高達 300T。獨特且獲專利的雙驅動配搭雙皮帶滑輪，使這美事成真!

透過雙皮帶滑輪系統，伺服馬達驅動press beam。固定滾筒彈性滾筒以及彈性皮帶之間的平衡相互作用，可確保折彎力量均勻分佈在整個press beam上。即使有 300T的折彎噸數，beam的偏移也是至微至小。

要求示範

Thank you

Thank you for your request

Model	壓力噸位	長度	壓力(KN)	最大行程 (mm)	開口高度 (mm)	下降速度 (mm/sec)	折彎速度 (mm/sec)	回升速度(mm/sec)	馬達功率(KW)	機床重量 (KG)
300-4100	300	4080	3000	400	690	90	50*	90	30	22.000

* 在CE版本中弯曲速度10毫米/秒

SafanDarley EC20 数控触屏折弯控制系统

R轴是数控驱动

Y1/Y2轴是数控驱动 (可倾斜 +/- 2.5 mm)

多选择数控驱动后定位 (X 轴)

在线条上手动式移动调校后定位

Wila NSCL-II MC 高级上刀夹具配置机械式销夹和 OB/S-3 机械式销夹下模

开口值 590 毫米 (Q 值)

两个支撑臂 (300 毫米)

“把持到运作” 功能脚踏

程控和集成安全光栅 (E-Control)

机床安全设计符合欧盟标准

配件

« 回到導引

Options:
- Z1+Z2 axis CNC controlled
- CNC controlled Delta X axis (horizontal transposition from a single back gauge finger)
- 3D back gauge

Bekijk opties

Options:
- Fixed support arms
- Fixed arms can be moved along the machine
- Fixed arms can be moved along the machine, and the height can be adjusted with a hand wheel
- Fixed arms can be moved along the machine, and the height can be adjusted pneumatically

Bekijk opties

Options:
- New Standard NSCL-l HC pro hydraulic tool clamp system
- European Style clamping (only in combination with a Q size of 650 mm)

Bekijk opties

Options:
- E-bend S
- E-bend L Blue

Bekijk opties

Options:
- E-Mate maximum plate weight 30kg.
- E-Mate Plus maximum plate weight 150 kg.
- E-Mate 2000 maximum plate weight 500 kg.

Bekijk opties

Options:
- Materials cupboard on the machine

Bekijk opties

Back gauge system that serves as a gauge for various plate material products Choice of back gauge systems depending on the complexity of the product to be bend.

The EC 30 control enables you to programme in 3D.

The system consists of two laser sensors on each side of the table, which are CNC controlled through the control system. The system continuously displays and corrects the position of the Y axis on the basis of the actual angle of the product, thus guaranteeing that the end product has the highest degree of corner precision.

The system measures the plate thickness down to one hundredth. You can programme exactly when measurements must be taken.

The bending aid supports and follows the plate very carefully throughout the entire bending process. The height and V size are variable and can easily be adjusted to the bending aid.

Fixed arms can be moved along the machine.

Fixed arms can be moved along the machine, and the height can be adjusted with a hand wheel.

Fixed arms can be moved along the machine, and the height can be adjusted pneumatically.

This intelligent bending aid stands out for its user-friendliness, ergonomics and quality.
I-Mate provides automatically calculated support during the entire bending sequence, from flat sheet to the programmed bending angle based on material type, sheet thickness and lower tool parameters.

I-Mate has a lifting moment of 750 Nm with a maximum sheet weight of 22Lbs (100 kg).