Spring naar navigatie Spring naar inhoud

R-Brake 100T-3100

R-Brake 100T-3100

SafanDarley R-Brake: the flexible bending cell

The SafanDarley R-Brake is a revolutionary bending-cell concept based on the SafanDarley E-Brake press brake. For the SafanDarley R-Brake, the press brake and the robot have been integrated into a single system. The robotic arm moves horizontally along a 6-metre long traverse at the top of the press brake. A feat of bending cell automation that ensures that the floor in front of the press brake is free for positioning sheet-feed and -discharge tables.

Vision system

The machine comes standard with a positioning table, but the basic model can be equipped with an optional vision system (pat. pending) for defining the zero position of the sheet. Double-sheet detection is safeguarded by an optional sheet-weight sensor, which will be mounted in the gripper.


Request a demonstration

Thank you

Thank you for your request

Technical specifications

Model Tonnage BowLength Pressure force in US Ton Cutting length in ft Maximum stroke in inches Q-dimension in inches Closing speed in inch/min Bending speed max. in inch/min Return speed in inch/min Motor power in kW Weight in lb
100-3100/50 110 122 112 122 12 31 307 24 307 20,0 33069
100-3100/70 110 122 112 122 12 31 307 24 307 20,0 33069
100-3100/80 110 122 112 122 12 31 307 24 307 22,5 33620
  • SafanDarley R-Brake 100T-3100
  • Pressure force 100 tons, cutting length 3100 mm
  • Integrated robotic arm with 50 kg capacity, optionally 70 kg
  • Traverse length 6 metres.
  • All the advantages of SafanDarley E-Brake technology
  • Comes standard with a zero table
  • Simple and fast changeover to manual bending
  • Optional Vision system
  • Optional traverse extension to 10 metres
  • Optional double-sheet detection by means of a weight sensor
  • Optional pre-positioner for sheet feed
  • Optional off-line programming with SafanDarley RoboWave simulation software

Complete Touch Screen convenience

The SafanDarley E-Control is fully touch screen, whereby the only buttons visible on the 17” screen are those that are needed during operation. The controls simply run on a PC under Microsoft Windows®, the software was developed based on Microsoft.net Framework.

Related | Maybe you are interested in these products