Spring naar navigatie Spring naar inhoud

R-Brake 100T-3100

R-Brake 100T-3100

SafanDarley R-Brake: the flexible bending cell

The SafanDarley R-Brake is a revolutionary bending-cell concept based on the SafanDarley E-Brake press brake. For the SafanDarley R-Brake, the press brake and the robot have been integrated into a single system. The robotic arm moves horizontally along a 6-metre long traverse at the top of the press brake. A feat of bending cell automation that ensures that the floor in front of the press brake is free for positioning sheet-feed and -discharge tables.

Vision system

The machine is standard equipped with a positioning table but optionally the basic model can be equipped with a vision system (pat. pending) for defining the zero position of the sheet. Double sheet detection is safeguarded by an optional sheet weight sensor which will be mounted in the gripper.  


Request a demonstration

Thank you

Thank you for your request

Technical specifications

Model Tonnage BowLength Pressure force in kN Cutting length in mm Maximum stroke in mm Q-dimension in mm Closing speed in mm/sec Bending speed max. in mm/sec Return speed in mm/sec Motor power in kW Weight in kg
100-3100/50 100 3100 1000 3100 300 790 130 10 130 20 15.000
100-3100/70 100 3100 1000 3100 300 790 130 10 130 20 15.000
100-3100/80 100 3100 1000 3100 300 790 130 10 130 22,5 15.250
  • SafanDarley R-Brake 100T-3100
  • Pressure force 100 tons, cutting length 3100 mm
  • Integrated robotic arm with 50 kg capacity, optionally 70 kg
  • Traverse length 6 metres.
  • All the advantages of SafanDarley E-Brake technology
  • Comes standard with a zero table
  • Simple and fast changeover to manual bending
  • Optional Vision system
  • Optional traverse extension to 10 metres
  • Optional double-sheet detection by means of a weight sensor
  • Optional pre-positioner for sheet feed
  • Optional off-line programming with SafanDarley RoboWave simulation software

Complete Touch Screen convenience

The SafanDarley E-Control is fully touch screen, whereby the only buttons visible on the 17” screen are those that are needed during operation. The controls simply run on a PC under Microsoft Windows®, the software was developed based on Microsoft.net Framework.

Related | Maybe you are interested in these products